MxS Pre-filled Spray Can

Instruction

MxS Pre-filled Spray Can can not be professionally used to color in a first phase. Firstly, it has been refilled with paint by a professional. Never attempt to refill a can athome or without the proper tools. Do not exceed a dose. An excess of quantity could cause the deformation or the explosion of the spray can. The method of use of refilled can is the same of any spray painting.

1. Shake the refilled MxS Pre-filled Spray Can vigorously 1-2 minutes.
2. Spray from distance 20-30 cm.
3. The exposure time between spray passes: 5 minutes.

Strongly recommended

1. To avoid paint sagging andobtain a uniform coverage give to application surface two thin layers instead of a thick one.
2. To clean the nozzle after finishing of dyeing process, invert the can and press until only the gas comes.
3. Use solvent-based paints to refill whose compatibility with pre-filled can already has been checked.
4. Use in well-ventilated places such as any spray paints.
5. Please, do not use on equipment connected to the electric supply.

We do not assume any responsibility for the specific result of the application except where the advice or the instruction information given falls within the scope of MxS products specified.

MxS Pre-filled Spray Can

MxS Pre-filled Spray Can